Featured Post

Infinix Hot 7 Copy MT6580 firmware 100% Tested working by S-tech

-
Image
   Here on this page you can have Access to download Infinix X624A/B/C Hot 7 Clone ( Copy ) Embedded with MT6580 chiptype, The firmware can help to fix All software issues like The Original Infinix Hot 7. It has MTK Chiptype mt6580. This firmware is 100% tested working no risk but dont make the mistake of format and download do that at your own risk and this firmware must be used on the device clone or fake infinix hot 7 x624 as in the picture below, flashing on other devices is at your own risk, Before taking a step to flash this you must make sure you know what you are doing. File info Firmware read from nck BaseBand CPU :MT6580  BaseBand CPU Secure Version : FF  BaseBand CPU Bootloader Version : 01  ----------------------------------------------------  INT RAM: 128 KB SDRAM  EXT RAM: 512 MB  DRAM  ----------------------------------------------------  EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930  EMMC FW VERS...
Post a Comment

How to fix samsung 7 edge G935f u2 Baseband unknown

-

Did you flash your samsung G935f efs file or firmware or even cert file or after unlocking network unlocking and discover that you you lost the imei number and the baseband and as a result there is no network on your device. Don't worry there is 100 percents for you.

How to Fix It

 Alright lets quickly jump in to fix this problem you need to download some files and follow carefully the tutorial 
Step1:  You need to Download the combination file COMBINATION_FA60_G935FXXU2ARA1_BoxWares.tar.zip the given link, this link will work for boot u1 and u2

Step2: You need to Download the full firmware G935FXXU2DRB6 from the given the file will work for both u1 and u2

Step3: Download odin3 3.13.1/2
Step4: extract the downloaded files into two different folders.

Step5: Boot your device into download mode to do this Go to step4 of this post

Step6: Launch the downloaded odin and click AP and navigate to the where you extracted the downloaded combination file and select it wait for 2 minutes till finish analyzing, now hit start and wait until done

Step7: Boot your device into Download mode again connect it to you pc and launch Odin and click BL navigate to the firmware folder and select first the file called BL 2 click AP and select the file called AP 3 skip CP and select CSC and when done selecting hit Start and wait till done 
Now you device will reboot and you are done you have you baseband back and network working again. 
For any question ask in comment......
Good Luck!! 

Comments

Post a Comment

Popular posts from this blog

Samsung G935F Efs file

-
Image
 Have get your Samsung S7 Edge G935f efs file U2 to fix:    1. No service    2. Emergency call only    3. Imei repair    4. Reboot  Pre-required  1 Download this Samsung USB driver 2 Download Odin 3.12.3 here 3 Download the efs file from This link . Note: don't extract the file 4 Go to download mode by switch off your phone pressing and holding volume down + Home + Power button and tap volume up again there you are in download mode connect you device with USB cable to your PC and launch your Odin and click Ap then navigate to the efs file you downloaded and select it click start wand with 3 to 4 seconds your phone will reboot you are done. Good luck.
Read more